Buy Brand Simply Wholesale Ubibot Soil Temperature And Moisture Probe For Gs1 3 Metres, Model Soil-Probe-3M-R-Audio online. Electronics,Soil Temperature And Moisture Probe
$73.56
SAVE 50%-80% OFF
$29.42
$0 today, followed by 3 monthly payments of $3, interest free. Read More
UBIBOT SOIL-PROBE-3M-R-AUDIO SOIL TEMPERATURE AND MOISTURE PROBE FOR GS1 3 METRES
Ubibot Soil-Probe-3M-R-Audio Soil Temperature and Moisture Probe for GS1 3 Metres. This product adopts modbus-rtu protocol, and the computer can monitor the temperature through the communication mode of RS485 interface. Cooperate with WS1 Pro and GS1 series product to monitor the data on computer platform or mobile APP, and generate soil moisture and temperature report through the platform. The soil temperature and moisture sensor measures soil moisture content based on frequency domain reflection method.
We think of the soil as a capacitance containing a medium, according to transmission line theory, the circuit due to the load impedance mismatch appear under a certain frequency resonant migration, reflection amplitude value is not the same at the same time, through comparing the difference of reflection wave and the incident wave amplitude value, measure the capacitance of the multiple reflection wave caused by the changes, and then measure the soil moisture content. The probe shell is made of ABS, which has good resistance to acid and alkali corrosion. The shell is completely wrapped and can reach the IP68 waterproof level, which means that the probe can be continuously measured in water.
It is widely used in homes, offices, farms and other places where soil temperature and moisture need to be measured.
All communication circuits shall follow the master/slave mode. In this way, data can be transferred between one primary station (e.g., PC) and multiple sub-stations. Any communication cannot start from a slave.
The information transmission mode is asynchronous, byte format is 1 start bit, 8 data bits, and 1 stop bit, no check.
Compliance with MODUBS RTU protocol standards.
The default baud rate is 9600 and the address is 0xC2.
FEATURES
RS485 Interface
High precision, wide range, good consistency
Super stability and anti-interference
Wide voltage input,DC5-12V
Standard MODBUS RTU protocol
Cooperate with WS1 Pro and GS1 to achieve remote monitoring, report generation and other functions
SPECIFICATIONS
Model: Soil-Probe-3M-R-Audio
Working Voltage: DC5V~DC12V
Output Interface: 3.5mm Audio
Communication Methods: RS485
Communication Protocol: MODBUS RTU
Communication Address: 1-255(can be customized)
Baud Rate: 300 bit/s,600 bit/s, 1200 bit/s, 2400 bit/s, 4800 bit/s, 9600 bit/s, 19200bit/s,38400bit/s,43000 bit/s, 56000 bit/s, 57600 bit/s,115200 bit/s(can be customized)
Standby Current: =20mA
Measuring Range: 0~100%
Measuring Accuracy: ±3%(0-50%);±5%(>50%)
Measuring Theory: Frequency Domain(FDR)
Measuring Range: -40~85
Measuring Accuracy: <±0.4
Probe Length: 50mm
Probe Diameter: F3.5
Lead Length: 3 meters
PACKAGE CONTENTS
1 x Ubibot Soil Temperature And Moisture Probe For Gs1 3 Metres